JUTAI Automatic Single Channel Access Control System

                                           JUTAI Automatic Single Channel Access Control System Introduction

Automatic Single Channel Access Control System Long Range RFID Reading Solution，it is for meet some special place, which only have one channel, and this channel is entry but also exit,it need long range attendance reading system for security：

Model BR-110 1unit barrier gate ;

Model LD-200 2pcs Double channel loop detectors ;

Model PUHF-9 2unit long range uhf readers ;

Model PUHF-L1 UHF sticker ;

Model LD-100 1pcs single channel loop detector ;

Model AC-22 1pcs two door controller.

The working principle ofAutomatic Single Channel Access Control System is that when the car presses the double channle loop detector (we call as loop 1)trigger coil at the entrance, to trigger the reader to read the card, the reader reads the card, and the reader collects the tag data and transmits it to the access controler via Wiegand. The access control panel judges that the card number is valid, (the ID of the tag has been pre-stored in the access control panel), it will output an opening signal to the barrier gate control panel, the barrier will open, when the car passes the loop coil (we call as loop2)under the barrier arm,After that, the barrier will be automatically closed; when the car presses on the second double channel loop detector, (we call as loop 3)the exit uhf reader does not transmit the UHF ID number to the access control panel.We have activated the direction recognition function of double channel loop detector.

In the opposite direction, when the car presses the double channle loop detector (we call as loop 1)trigger coil at the exit , to trigger the reader to read the card, the reader reads the card, and the reader collects the tag data and transmits it to the access controler via Wiegand. The access control panel judges that the card number is valid, (the ID of the tag has been pre-stored in the access control panel), it will output an opening signal to the barrier gate control panel, the barrier will open, when the car passes the loop coil (we call as loop2)under the barrier arm,After that, the barrier will be automatically closed; when the car presses on the second double channel loop detector, (we call as loop 3)the exit uhf reader does not transmit the UHF ID number to the access control panel. We have activated the direction recognition function of double channel loop detector. 

 

Product Specifications

 

System Diagram

 

Our company deals in Entrance Automation & Security Products. including Automatic Boom Barrier, Parking Barriers, Inductive Loop Detector, Infrared Photocell Sensor. RFID Proximity Reader System, UHF Long Range Reader System, Gate Openers. Parking Management System, Visitor Management System, Other Automation Products. Sincerely hope we can work together!

Thanks for reading!

Website: www.jutaigateaccess.com   www.jutairfid.com    
Whatsapp: (+86)13713836456
Skype: (+86)18172089004

Wechat: (+86)18172089004 

 

Automatic Single Channel Access Control System/  Single Channel Access/ Single Channel/ Access Control